Posts in Home Stuff
Portrait of a Young Woman
PortraitYoungWoman LivingRoomFinal.jpg

One of the issues with having tall ceilings is the large expanse of empty wall… it can be a blessing and a curse. Often times it is difficult to find large artwork to fill the wall, and most large-scale artwork typically is expensive. In the past I’ve usually gone the route of printing a design onto a canvas and then stretching it out onto a frame myself.

Usually I would print a design onto a shower curtain using Society6.com and then I’d make a lightweight wooden frame on which I’d stretch and staple the fabric. I’ve done that a few times, but wanted to try a different method. I’ve always liked the way posters and newsprints look when hung on wooden frame hangers like these below.

Magnetic_Poster_Frames_Ply_1024x1024.jpg

Given the size of the print, I knew this would be a fun opportunity for a DIY solution. Instead of printing onto a curtain this time, I decided to print onto the tapestry fabrics Society6 now offers. The size I picked was 68x80 inches. The print arrives folded, with a lot of wrinkles, so it is worth taking the time to iron it fully on both sides to smooth out as many creases and wrinkles as possible… no one wants to see a wrinkly print hanging on a wall!

Construction of the hanger was pretty simple and straightforward. I picked up some thin floor molding wood that I had cut to size, and then I gave it a quick sanding to smooth out minor imperfections on the surface as well as to round the sharp corners. Since the print was about 68” wide, I had the wood cut to 70”.

PortraitYoungWoman Process 01.jpg

I sandwiched the tapestry print in between two wood pieces and clamped them in place using a gator clip on one end, making sure that the fabric was as straight as possible along the edge while leaving about a quarter inch margin to the edge.

PortraitYoungWoman Process 03.jpg

Once the fabric was sufficiently straightened I clamped the opposite end with another gator clip. Next I secured the wood pieces and fabric in place with my staple gun, placing a staple about every 3 inches or so, on what will end up being the rear side of the hanger. I then repeated the process on the opposite side of the fabric. In order to hang the completed piece, I used a small OOK cleat to secure it onto the wall. The OOK cleat was incredibly simple to apply since it includes a level for easy aligning.

1568331491.jpg
PortraitYoungWoman Process 02.jpg

Below you can see the image I printed. I wanted something very colorful, but also that had a figure in it. While looking around for inspiration I stumbled across a set of beautiful paintings by German artist, Ernst Deger. His painting Portrait of a Young Woman was perfect, I loved the downward glance and how it would interact with the couch in the living room. A few hours of Photoshop later, I had transformed his painting into something reminiscent of an acid trip.

I’ve already started thinking of ways to improve the hanger for future tapestries I might make. One of the toughest parts of the process was trying to make sure the wood pieces were level with each other and the room. Since they’re stapled in place, I had to remove the staples and tuck a little more of the fabric into position and then re-staple and check the level again. I think for a new version I will probably drill a few holes through the wood pieces and tapestry, and clasp them together with a short bolt and nut; that way if I need to make any adjustments its a simpler process than removing the staples and re-stapling.

LivingRoomFinal 02.jpg
Enter through here

Before diving into the house interior and our move-in progress, I thought it would be interesting to take a look at the evolution of the house’s main entrance. Or at least it would be interesting to me, as I love seeing before and afters and progressing photos, haha!

I think when we started the Fairmount project we didn’t really have any huge aspirations for what the front entry could become, or really with the exterior as a whole. Our main focus for the exterior at the time was just on adding the Beetlejuice house faux wall. It wasn’t until we had to dig into a more fuller replacement of the exterior siding that we began to play around with more ideas for the general exterior. And it wasn’t until we axed the slatted ceiling design feature in the upstairs loft that we actually honed in on a new design feature that would become one of the house’s new signature elements – the large round window, or eye as we’ve affectionally begun to refer to it as.

If you recall, the original front entry had a large rectangle of glass blocks above the door, followed by a triangle shaped window above that. From the start we were set on replacing the glass blocks with a regular picture window, but we were a little torn on the triangle window. From the outside of the house the triangles felt harmonious to the house because they followed the slope of the roof gable. However on the inside of the house the ceiling up there was not pitched and could not be without sacrificing attic access to one side of the house. In the end both windows were replaced with the large round window.

Looking back on that decision now that we have the final product, we could not be happier! The eye adds so much character to the house, especially at night when the globe pendant “iris” is turned on. As seen in the first picture below, we placed a color LED smart bulb in the globe for added quirkiness. Enjoy the slideshow trip through the progression of the front door entry!

Moved in!

It’s been quiet here hasn’t it?

Jon and I have been so busy with the move and settling in to the new house… plus all that unpacking, oh gosh so much unpacking. It’s been almost 3 months since we moved into the house and we’re pretty much through with unpacking now finally (save for those few pesky boxes that never seem to get opened and just drift from house to house never getting unpacked). We’re now in the nesting stage, I guess… moving things around from one part of the house to another and endlessly adjusting decorative items – the fun stuff!

We’ll start posting more updates very soon, but in the meantime we just wanted to wipe off the dust from the blog.

Move-in night… I think this was about 50% of all the boxes and stuff we had. We still have to deal with recycling all these flattened boxes… IT. NEVER. ENDS.

Move-in night… I think this was about 50% of all the boxes and stuff we had. We still have to deal with recycling all these flattened boxes… IT. NEVER. ENDS.

Bathroom progress

The Fairmount house is progressing very quickly and is speeding towards the finish line very soon! We’re excited to share photos of the progress on other areas of the house, but for now I thought it would be great to show an update on the main level bathroom. As you may recall from the earlier posts, the main star of the bathroom is the tiled mural wall.

Below you can see the approved Alexander Girard inspired tile layout as laid out on the floor temporarily. Being that the pattern is quite complicated, the tiler came up with the great idea to numerate each tile based on a printout we gave him. This surely expedited the process of getting the tiles onto the wall, and the end results really look amazing.

Test layout for approval

Test layout for approval

Numerated tiles

Numerated tiles

The pattern is quite impactful, especially for such a small space as a bathroom, but we couldn’t be happier with it. “Go big or go home” as the saying goes! Complementing the mural wall, the rest of the bathroom tile is black – with black penny tiles covering the floor and black cement Clé tiles covering the side wall as well as the shower.

Fairmount Bathroom 03.jpg
Fairmount Bathroom 04.jpg
Vintage Shop Score!

We have been trying as best as possible to get out whenever we have a chance and explore different areas around our temporary apartment as well as near the Fairmount house. Today we decided to branch out a bit more and check out some of the offerings around Beaverton, which is about 25 minutes away from the house by car. Specifically we wanted to check out a vintage video game store, Retro Game Trader, but it turns out there are a couple of general vintage store nearby there that we could check out along the way.

While in one of the other vintage stores this large white globe caught my attention from the corner of my eye. I walked over to what looked like a Kartell FL/Y pendant light, and then did a quick double take when I saw the price tag – $45! I had recently been doing some online window-shopping for pendant and chandelier options to hang in the Fairmount house, and the FL/Y was one of the options the we liked, so the price was sort of still fresh on my mind: about $350 for the medium size.

I quickly inquired to take a closer look and verify whether it was actually the real thing or if it was a similarly styled light. Turns out it was a genuine FL/Y light! The store also had an attractive translucent orange/amber colored model, but alas that one was covered in some deep and noticeable scratches upon close inspection. Such a shame too, the color was gorgeous and the way the transparency played with the light was amazing. I still probably would have preferred the opaque white version nonetheless, though, since it would match the house better.

FLY Pendant 1.jpg

Now to find a spot for it somewhere in the Fairmount house… It would look great in the dining room. We're planning to switch to a round shaped table with a black finish, so the light would look beautiful floating above it – plus the living room will be getting a Moooi Random Light, so the shape of the FL/Y light can play off of that light since the two will be near each other. Alternatively it could maybe go in the family room, perhaps floating low over our round coffee table.

The color and shape of the dome remind me a lot of the 2002 Apple iMac G4, the version with the adjustable display that resembled the Luxo lamp. 

That was one of my favorite iMac designs (C'mon! The CD drive stuck out like a tongue! What's not to love?!), and in a similar vintage shopping story, I have a working unit that I found a couple years ago at a salvage shop for just $30. Whatever room the FL/Y light ends up I will need to be sure to place my old iMac in the same room so that they can keep each other company. Fingers crossed that the FL/Y light actually still functions, though!